- Tel: 0086 135 01592453
- E-mail: sales@consnant.com
- Skype: higredpower
O que você está procurando?
Inversor híbrido de carregamento AC/SOLAR fora da rede
Modelo: CNS110 1-12KW
Tensão nominal:120VAC 1-6KW;220/230/240VAC1-12KW
Frequência nominal: 50/60Hz
item número :
CNS110 1-12KWOrdem (MOQ) :
10 pcsPagamento :
T/TOrigem do produto :
ChinaCor :
WhitePorto de embarque :
ShenzhenTempo de espera :
2 weeksPeso :
20-60 KgInversor híbrido de carregamento AC/SOLAR fora da rede
Descrição
O inversor da série CNS110 é uma onda senoidal pura de baixa frequência Dc 48V a AC 220V, tudo em um inversor. O inversor solar eletricamente integrado consiste em um inversor de onda senoidal pura de fase dividida de 1KW-12KW DC 48V a 120/240 volts AC com controlador de carga solar MPPT de 60A ou 120A e carregador AC para carregador de bateria DC e uma chave de transferência automática ideal para desligar -sistema solar de grade.
Características:
• Carregador AC/Solar Inversor Híbrido Off grid.
• Display LED/LCD, configuração de funções aprimoradas via LCD, design inteligente homem-máquina.
• Controlador de carregador solar MPPT opcional de 60A integrado.
• LCD mostra a capacidade solar.
• Corrente de carga CA ajustável em 5 estágios.
• O carregamento AC também pode ser fechado.
• Os modos prioritários AC/DC podem ser fechados.
• Sinal de reinicialização do gerador (Contato seco).
• 3 vezes a potência máxima. Forte capacidade de carga.
• Sobrecarga, proteção contra curto-circuito de saída.
Technical specifications
| Model | CNS110-1KW -12KW | ||
| LV Model(1-6KW) | HV Model(1-12KW) | ||
| Line Mode Specifications: | |||
| Input Voltage | Input Voltage Waveform | Sinusoidal (utility or generator) | |
| Nominal Input Voltage | LV 120Vac | HV 230Vac | |
| Low Line Disconnect | Normal:85Vac±4% | Normal:184Vac±4% | |
| Wide:80Vac±4% | Wide:135Vac±4% | ||
Low Line Re-connect |
Normal:95Vac±4% | Normal:194Vac±4% | |
| Wide:85Vac±4% | Wide:145Vac±4% | ||
High Line Disconnect |
Normal:136Vac±4% | Normal:263Vac±4% | |
| Wide:140Vac±4% | Wide:263Vac±4% | ||
| High Line Re-connect | Normal:131Vac±4% | Normal:253Vac±4% | |
| Wide:135Vac±4% | Wide:253Vac±4% | ||
| Max AC Input Voltage | 150Vrms | 270Vrms | |
| Input Frequency | Nominal Input Frequency | 50Hz/ 60Hz(Auto detection) | |
|
Low Line Frequency Re-connect |
51+0.3Hz for 60Hz; 41+0.3Hz for 50Hz; |
||
| Low Line Frequency Disconnect | 50+0.3Hz for 60Hz; 40+0.3Hz for 50Hz; |
||
|
High Line Frequency Re-connect |
64+0.3Hz for 60Hz; 54+0.3Hz for 50Hz; |
||
| High Line Frequency Disconnect | 65+0.3Hz for 60Hz; 55+0.3Hz for 50Hz; |
||
| Main Functions | Output Voltage Waveform | As same as Input Waveform | |
| Over-Load Protection (SMPS load) | Air switch | ||
| Output Short Circuit Protection | Air switch | ||
| Max Bypass Overload Current | 40A/50A | ||
| Battery Inverter Mode Specifications: | |||||
| output | Output Voltage Waveform | Sine wave | |||
| Rated Output Power (KW) | LV:1/KW/2KW3KW/ 4KW/5KW/6KW |
HV:1KW/2KW/3KW/4KW/5KW/6KW/ 7KW/8KW/9KW/10KW/12KW |
|||
| Power Factor | 0.9~1.0 | ||||
| Nominal Output Voltage (V) | LV:120Vac±10%rms | HV:230Vac±10%rms | |||
| Nominal Output Frequency (Hz) | 60Hz±0.3Hz 50Hz±0.3Hz |
||||
| DC Voltage | Nominal DC Input Voltage | 12VDC/24VDC/48VDC | |||
| DC Voltage range | 10-15.5Vdc for 12VDC 20-31.0Vdc for 24VDC 40-62.0Vdc for 48VDC |
||||
| Low Battery Alarm | 10.5Vdc±0.3Vdc for 12V battery 21.0Vdc±0.6Vdc for 24V battery 42.0Vdc±1.2Vdc for 48V battery |
||||
| Low DC input Shut-down | 10.0Vdc±0.3Vdc for 12V battery 20.0vdc± 0.6Vdc for 24V battery 40.0Vdc±1.2Vdc for 48V battery |
||||
| High DC input Alarm & Fault | 16Vdc±0.3Vdc for 12V battery 32Vdc±0.6Vdc for 24V battery 64Vdc±1.2Vdc for 48V battery |
||||
| High DC input Recovery | 15.5Vdc±0.3Vdc for 12V battery 31.0Vdc±0.6Vdc for 24V battery 62.0Vdc±1.2Vdc for 48V battery |
||||
| AC Charger | Nominal Charge Current | 20A/35A/50A/70A/90A(5 stages adjustable charging current) | |||
| Charge Current Regulation | ±5Adc | ||||
| Over Charge Protection | Bat.V≥15.5VDC for 12V battery Bat.V≥31.0VDC for 24V battery Bat.V≥62.0VDC for 48V battery beeps 0.5s every 1s & fault after 60s |
||||
| Algorithm | Three stage: Boost CC (constant current stage)→ Boost CV (constant voltage stage)→ Float (constant voltage stage) |
||||
| Solar charger | Rated Charge Current | 40A | 60A | ||
| Rated charge battery Voltage type | 12V/24V/48V | 12V/24V | |||
| Max.PV open circuit array voltage |
12V for 40Vdc |
||||
| Charger mode | MPPT | ||||
| PV Low Voltage Re-connect | PV≥Bat.V=3V | ||||
| PV Low Voltage Disconnect | PV≤Bat.V | ||||
| Efficiency | Efficiency | ≥97% | |||
| Efficiency (Battery Mode) | ≥85% | ||||
| Efficiency (Line Mode) | >98% | ||||
| Transfer Time | Ac to Dc | 20ms(Max) | |||
| Dc to Ac | 15ms (Max) | ||||
| System parameter | Over-Load Protection | 110%<load<150%, beeps 0.5s every 1s, and Fault after 60s off the output, Load>150%, beeps 0.5s every 1s, and Fault after 20s. |
|||
| Output Short Circuit Protection | Current limit (Fault after 10s) | ||||
| Surge rating(10s) | 1:3(VA) | ||||
| Power saver | Load≤25W(Enabled on"P/S auto" setting of Remote control) | ||||
| Protections | Low battery, over charging, over load , over temp. | ||||
| Indicators | LED+LCD Display | ||||
General Specifications |
Operating Temperature Range | 0℃ to 40℃ | |||
| Storage temperature | -15℃~60℃ | ||||
| Operation humidity | 5% to 95%(non-condensing) | ||||
| Audible Noise | 60dB max | ||||
| Cooling | Forced air, variable speed fan | ||||
| Dimension(L*W*H) | 1-3KW: 526x423x260mm 4-6KW: 530*396*190mm 7-12KW:627*416*204mm |
||||
| Net weight(Kg) | 1KW 21.5Kg;1.5KW 23.5kg;2KW 26Kg; 3KW 30.5kg;4KW 32kg; 5KW 36.5kg; 6KW 40.5kg;7KW 43.5kg; 8KW 50kg; 10KW 57.5kg;12KW 60 kg |
||||
TAG :
Inscreva-se em nossos boletins
Tel : 0086 135 01592453
E-mail : sales@consnant.com
Endereço : Building B6, Junfeng Industrial Park, Yonghe Road, Fuhai Sub-District, Bao'an District, Shenzhen City, 518103, P.R.China
direito autoral © 2024 Shenzhen CONSNANT Technology Co., Ltd. Todos os direitos reservados
IPv6 REDE SUPORTADA
